bluechem products
PTS33178
Reduces friction, makes shifting easier and helps maintain seals and sealing rings. This results in smoother switching and an extended service life. The renewed deposition of resins and similar contaminants is delayed.
Advantages:
– increases the service life of the automatic transmission
– oxidation is slowed down
– reduces friction, operating and maintenance costs
– optimal lubrication is ensured
– improved power development
– reduces heat loss
– extends oil change intervals
Our product is suitable for all automatic transmissions and oils.
scope of application
For all torque converter and CVT transmissions as well as automatic transmissions without a wet clutch.
Instructions for use
Add automatic transmission protection to the transmission oil. Reduce the filling quantity of the gear oil by the corresponding filling quantity of the product.
consumption
375 ml for cars; 10% of transmission oil volume for trucks
exposure time
Packaging sizes: 5L, 10L, 20L, 200L, 375ml
Works while driving.
PTS33230
OXICAT is a specially developed high-performance cleaner to sustainably and effectively remove dirt as well as soot and carbon residues in the entire exhaust system, especially in the area of the catalytic converter, lambda sensor, turbocharger and EGR valve. When used regularly, it offers protection against re-contamination, increases fuel efficiency, optimizes engine performance and ensures the proper functioning of the catalytic converter and lambda sensor. In this way, OXICAT supports compliance with emission limit values.
BENEFITS
- Removes existing deposits
- Provides protection against heavy contamination with regular use
- Restores engine performance
- Ensures proper functioning of the lambda sensor/catalytic converter/turbocharger and EGR valve
- Prevents or eliminates problems indicated via OBD become
WHY OXICAT?
Over time, the progressive contamination of the parts installed in the exhaust system, such as the catalytic converter, lambda sensor, turbocharger and EGR valve, leads to a significant increase in fuel consumption and the emission of harmful exhaust gases, such as: B. carbon monoxide and hydrocarbon. In addition, the engine performance deteriorates noticeably. These problems occur in all vehicles, especially in short-distance driving and in vehicles with exhaust gas recirculation, direct injection and turbochargers, and in areas with poor fuel quality. There are often OBD (on board diagnostics) error messages that are displayed to the driver via his cockpit.
scope of application
Use in all petrol and diesel engines and hybrid vehicles. Recommended use for vehicles that have not passed the emissions test (part of the general inspection) due to excessive exhaust emissions.
Instructions for use
Add to fuel tank. Pay attention to the mixing ratio! Use every 3-4 months, but at the latest at the next customer service.
consumption
300 ml is sufficient for 60-80 liters of fuel. Mixing ratio: 1:200
exposure time
Packaging sizes: 20L, 200L, 300ml, 1000L
Works while driving
PTS33181
Nano internal engine protection creates a highly active nano-barrier in the oil that protects all internal surfaces in engines and units, such as oil circuits, manual transmissions, differentials and differential gears. Seals, O-rings and Simmerrings are kept supple. Fastest lubrication during cold starts, smoother and smoother engine running, improved engine performance, longer service life of the units and excellent emergency running properties are achieved by adding the Nano internal engine protection.
scope of application
Service product for use in the oil circuit of 4-stroke and diesel engines, manual transmissions, differentials and differential gears. Can be used for both common rail and pump injectors, recommended for engines with turbo, catalytic converter and soot particle filter.
Instructions for use
Add to the new oil after every oil change. We recommend cleaning the oil circuit with oil system cleaner before use. Maximum oil quantities according to the manufacturer's specifications must be observed. When used in vehicles with wet clutches, the manufacturer's instructions must be observed.
For power steering, gearbox and differentials, dose in a ratio of 1:10.
consumption
300 ml is sufficient for up to 5 liters of oil. Mixing ratio: 1:15
exposure time
Packaging sizes: 1L, 5L, 10L, 20L, 200L, 300ml, 1000L
Works while driving.
PTS33179
Reliably dissolves and removes resins, oxidized oil residues and operational deposits and contaminants in the transmission oil circuit. Automatic transmission cleaning fundamentally cleans the entire system.
This:
– Dirt is completely dissolved
– has a noise-reducing effect and ensures safe and smooth gear running
– optimizes switching behavior
– costly repairs are avoided
Why use it?
Today's gear oils are usually of good quality, but these cannot prevent operational contamination and oxidized oil residues from settling on the gear parts over time and making them difficult to remove. Consequence: loss of performance and switching problems. The system runs out of roundness and the dirty parts are subjected to higher loads. Our automatic transmission cleaning can help. Our product is suitable for all automatic transmission oils.
scope of application
In all types of automatic transmissions
Instructions for use
Add to the oil circuit before changing the transmission oil. Operate the system for approx. 10-15 minutes with frequent load and switching changes. Then change the transmission oil according to the manufacturer's instructions.
For new vehicles, we recommend cleaning the automatic transmission after a transmission mileage of 25,000 km. After that, cleaning should be done every 50,000 km of mileage.
consumption
375 ml for cars; 75 ml per liter oil capacity for trucks
exposure time
approx. 10-15 minutes
Packaging sizes: 5L, 10L, 20L, 200L, 375ml, 1000L
PTS33398
DSSC is a high-performance cleaner for all diesel engines that has been optimized for use in vehicles with soot particle filters and only contains ash-free ingredients. It removes operational contamination, gumming and adhesions in the entire diesel system from the tank, injection nozzles and injection pumps to the combustion chambers. This optimizes fuel atomization. Coking residues and soot deposits in the entire upper cylinder area are removed and at the same time protect it (optimal lubrication according to DIN 590 HFRR). This results in clean, powerful combustion (noticeable fuel savings and optimized engine performance), improves exhaust emissions and extends the service life of the injection units.
Your advantages:
– Strong and clean combustion (optimal engine performance and significantly reduced fuel consumption)
– Significant reduction in smoke and soot
– Improved lubrication during cold starts
– Extended service life of the injection system and catalytic converters
– Improvement in exhaust emissions
scope of application
In all diesel engines. Suitable for catalytic converters, soot particle filters and turbochargers.
Instructions for use
Add to the diesel fuel tank or use a cleaning device every 3-4 months, but at the latest at the next customer service. Pay attention to the mixing ratio!
consumption
375 ml is sufficient for approx. 80 liters of diesel fuel. Mixing ratio: 1:200
exposure time
Packaging sizes: 1L, 5L, 10L, 20L, 200L, 375ml, 500ml, 1000L
Works while driving
PTS35142
Klima Fresh (KFL) ensures fresh and clean air in the vehicle interior. The air conditioning works more efficiently and with optimal cooling performance. The product gives the entire vehicle interior such as: B. Upholstery, carpets and headliners have a pleasant and fresh scent. Recommended use every 6 months.
scope of application
For eliminating odors in vehicle interiors and vehicle air conditioning systems. Application in cars, trucks, commercial vehicles etc.
Instructions for use
Dry the evaporator for 5-10 minutes at the following settings: Engine: On, A/C: Off, Air supply: Recirculated air, Temperature: Warm, Fan: Max. Then place KFL in the footwell of the vehicle, switch the air conditioning on and to recirculated air ( Fan: at highest level, temperature: cold) and press the self-release button on the can. Keep doors and windows closed. Empty the can after about 1 minute. Let the vehicle continue to run for about 3-5 minutes. Then ventilate the interior well after use.
consumption
100 ml for one application
exposure time
Packaging sizes: 100ml
approx. 3-5 minutes
PTS33450
The high-performance cleaner for diesel particulate filters is a special diesel additive solution that is used as a regeneration aid for diesel particulate filter systems. The most economical way to maintain and clean particle filters! The product can be used in all diesel engines and can be mixed with all diesel fuels.
Advantages:
– permanent and complete filter cleaning while driving
– no installation or removal, no downtime, no malfunctions
– reduces the ignition temperature of the soot collected in the diesel particle filter
– no generation of secondary emissions
scope of application
Can be used in all diesel engines with particle filters and can be mixed with all diesel fuels.
Instructions for use
Please follow the dosage instructions carefully! Add to diesel fuel immediately before refueling. 375 ml is sufficient for 60-80 liters of diesel. Recommended use every 3 months. Be careful not to overdose!
consumption
375 ml is sufficient for 60-80 liters of diesel.
exposure time
Packaging sizes: 5L, 10L, 20L, 200L, 375ml, 1000L, 1000ml
Works while driving.
PTS33028
For the sustainable removal of dirt and gum deposits in the entire fuel system from the tank to the combustion chambers. Resin and adhesions in the carburetor and injection nozzle area and coking residues and soot deposits in the entire upper cylinder area as well as moisture and condensation are reliably removed. This optimizes fuel consumption and exhaust emissions and increases the service life of the engine.
scope of application
Motor vehicles, motorcycles and other high-performance engines (e.g. ships and boats, go-karts, racing engines, lawnmowers, etc.)
Instructions for use
Add regularly to the fuel system every 3 to 4 months before refueling.
Attention:
Cleaning fluid – not a fuel substitute!
Use only in well ventilated rooms. Keep away from sources of ignition!
Do not smoke! Keep out of reach of children.
consumption
300 ml is sufficient for one tank filling
exposure time
Packaging sizes: 1L, 5L, 10L, 20L, 200L, 300ml, 1000L
works while driving
PTS33048
Oil system cleaning removes operational contamination and gumming in the entire oil and lubricating circuit, residues and coking in the piston ring and upper cylinder area and neutralizes harmful engine acids. This leads to reduced fuel consumption, improved engine performance, less wear on the aggregates and longer service life of the catalytic converter. In addition, internal engine cleaning protects the engine during the cleaning process with highly effective lubricating components.
scope of application
Use in the oil and lubrication circuit of 4-stroke and diesel engines, manual transmissions, differentials and high-performance units such as ship engines or emergency generators
Instructions for use
Add to used engine oil before changing the oil. Let the engine run at idle for approx. 15 minutes. Then change the oil and filter according to the manufacturer's instructions.
consumption
300 ml is sufficient for up to 5 liters of oil. Mixing ratio: 1:15
exposure time
Packaging sizes: 1L, 5L, 10L, 25L, 200L, 300ml, 1000L
approx. 15 minutes with the engine running
PTS33326
Radiator Flush eliminates operational deposits in the entire cooling system, removes lime and scale deposits, protects against rust and corrosion, dissolves dangerous radiator sludge, cleans water coolers, boilers and heat exchangers. The product makes valves, thermostats and water pumps work again. The use of Radiator Flush increases operational reliability and the service life of the units. Furthermore, the heating and cooling performance improves.
scope of application
Can be used in all cooling systems with closed water cooling such as in cars, trucks and heat exchangers in the industrial sector.
Instructions for use
Before each coolant change, add Radiator Flush to the used coolant. Depending on the size, operate the system for approx. 15-40 minutes and then empty the system. After draining, rinse with fresh water! Then change the coolant according to the manufacturer's instructions and use radiator conditioner as a preventive measure.
consumption
300 ml is sufficient for 8 liters capacity
exposure time
15-40 minutes depending on the size of the system.
Packaging sizes: 5L, 10L, 25L, 200L, 300ml, 1000ml, 1000L
